DIAG: Not shifting correctly. Making clunking noise when put in gear. Check over car a REC other needs. WRITE UP: -Road tested vehicle, vehicle does not shift out of first gear. -Scanned vehicle systems, multiple codes stored. -Controlled area network message not being received from transmission control module, multiple other CAN messages received relating to lack of communication faults. Fault code also stored for checksum error in ETC/EGS control unit, values are missing or have not been entered. ASSYST active service system coding is faulty and/or incomplete. Total of 107 codes stored. Global OBD code U0101 stored for loss of communication with TCM. -Checked accessible fuses, no faults found. Left front marker lights flickers with key on, right front marker lamp is out. -Battery looks freshly installed (11/19). Attempted to clear codes to check for hard code failure, code 1405 (U0101) immediately returned for CAN communication message not being received from TCM, amongst other CAN communication codes. NOTED: -Oil filter housing cap is badly leaking engine oil. -Radiator is leaking, right side.
Kiea W. gave our service a 5 star review on 2/4/2020