JSON-LD markup generated by Google Structured Data Markup Helper.

2016 Chrysler 200

  • 2016 Chrysler 200

    Chrysler 200
    Service Date
    Services Performed
    • 1: Brake Line – Right rear hard line to brake caliper has been replaced with bulk line, routed incorrectly, with excessive bend at lower section causing restriction. Flare fittings on both ends of line are seeping brake fluid. Brake line retaining bracket with "horseshoe" clip that mounts to caliper is missing. Incorrect routing has caused rubber line section to rub against suspension spring, causing damage. Body mount bracket for brake line has been displaced/bent. Parking brake wiring harness is routed and installed incorrectly to lower control arm. Recommend factory hard line to caliper, rubber line/hose, hose bracket (mounted to caliper, with horseshoe clip), and system bleed – 2: Check Engine Light/Oil Leak(s) Scanned systems for trouble codes, see printout. P0520 stored for engine oil pressure sensor/circuit fault. Sensor appears recently replaced, brank unknown. Oil leakage found around sensor, possibly from removal and reinstallation. Oil leaking from above sensor as well, coming from oil temperature sensor mounted in cylinder head. Small amount of oil pooling around cylinder #1 VVAA solenoid, not confirmed, likely from oil temp sensor adjacent to solenoid. Replacement oil temp sensor recommended – Labor time not published 3: Water leak into trunk – Right rear tail lamp is not secured to body, mounting hole on body is damaged. Refer to body shop
    • OIL PRESSURE SENDER OR SWITCH – Remove & Replace – In-Line4
    • BRAKE HOSE – Remove & Replace – One – [Includes: Bleed Brake System.]
    • OIL TEMPERATURE SENSOR OR SWITCH – Remove & Replace – In-Line4
    William C. gave our service a 5 star review on 7/29/2021


Bryant Brothers
2420 Central Pkwy
Decatur, AL35601
(256) 822-9086

We Service